Please check the times and location for each training carefully as there are multiple training sites. Early arrival for parking and registration is always recommended.
If you are using GPS, enter the address: 101 Service Center Rd., Amherst (Buffalo), NY.
You can use the Google map on the right side to enlarge the image and view the exact location of the building near the intersection of Maple Rd. and Flint Rd.,
Entering via the Flint Road entrance (off Maple Road), make the
first left (onto Service Center Road) -- the Center for Tomorrow is
on the corner to your left -- parking is on the right.
Entering via the Flint Road entrance (off Maple Road), continue
through the light to Augspurger Road -- continue straight for the
Park Lot -- or make a right for Jacobs Lots A, B and C.
Parking permits are required from 7 a.m. to 3 p.m. Monday through Friday.
Visitor permits will be sent to you prior to your training.
After 3 p.m., you do not need a parking permit.
Training rooms are on the second floor in room 214 or room 206 as identified in the training description. Continuing education staff offices are also on the second floor of Parker Hall - room 232.
Turn left when you get out of the elevator on the second floor and proceed to the designated training room.
Enter through back of building using the outside elevator
entrance. Disability accessible parking spaces are located by the
outside elevator and in select sections of the row in the parking
lot closest to the building. Refer to the Google map on the right
for a detailed street view.
Diefendorf Hall is located on the UB South Campus, 3435 Main St., Buffalo, NY 14214.
Room 146 is on the first floor. Enter the Diefendorf parking lot and it faces the side of Diefendorf as show in the photo on the right. Follow the red arrow in the photo to the side door and ramp entrance. Room 146 is located just as you enter at this entrance.
The South Campus map is at this link. Diefendorf Hall is Building 15 on the campus map.
Google Maps driving directions link: The easiest way to access Diefendorf Hall is to take Bailey Avenue and enter on Sherman Road which directly takes you to the Diefendorf Lot that faces Diefendorf Hall as shown in the photos.
Parking permits are required. If you were not mailed a visitor parking permit by our office, we will have some available at the training.
Disability parking spots: Located in the Diefendorf Lot closest to the building. There is a ramp at the entrance marked below in the photos. Use the RIGHT side entrance if you need the ramp.
Vending machines & restaurants: Vending machines are in the building near the training room. There are a variety of fast food restaurants on Main St. across from South Campus that you may drive to for lunch and TOPS Markets is also across from campus. Harriman Cafe in Harriman Hall next to Diefendorf should also be open for lunch.
567 Exchange Street
Buffalo, NY 14210
The training room is Suite 100.
Parking is in the rear of building. Training room entrance is on the end of the building as you enter the parking lot. Please note there are multiple tenants in this building.
GCC- Conable Technology Building
One College Rd., Batavia, NY 14120
Parking permits are not needed. Please arrive early for the most convenient parking. The Conable Technology Building is on the main part of the GCC campus and is the building closest to Hawley Dr.
Hyatt Place Buffalo/Amherst
5020 Main Street
Amherst, New York, 14226
Directions and map Hhotel rooms available if you wish to stay overnight.)
Park in the parking lot by entering from the Main St. entrances. Parking is free.
Suite 262 is on the 2nd floor.
Stairs and elevator available.
5500 Main St.
Williamsville, NY 14221
The building offices are accessible. There is an elevator at the front entrance of the building. Accessible restrooms are located on all floors.